External Wall Waterproofing

The external walls directly face rain and harsh weather conditions.

Using damp proof primer or elastomeric coating on exterior walls reduces moisture absorption.

Walls facing the west side are more prone to heat and rain damage

Balcony & Utility Area

If water outlets are not properly planned in balconies and utility areas, water stagnation will occur.

Waterproof grout should be used near tile joints and drain areas.
In many homes, leakage starts from these locations first.

Underground Sump & Overhead Tank

If sump and water tank waterproofing is ignored, continuous seepage problems may occur.

Using crystalline waterproofing or membrane coating during construction provides long-term protection.

Pipe Penetration Areas

Areas where pipes pass through walls or slabs are highly vulnerable to leakage.

Flexible sealants must be used around these openings to prevent water seepage.

Parapet Wall Cracks

If the parapet wall coping on the terrace is not properly finished, rainwater will slowly seep inside the wall.

Cracks in parapet joints often lead to ceiling leakage.
Proper slope on top of the wall sloping to the terrace and waterproof coating are essential.

Tile Joint Waterproofing

If tile joints in bathrooms or terraces open up over time, water will directly seep below the tiles.

Instead of ordinary white cement, epoxy grout should be used for long-lasting protection.

Drip Course Importance

If a drip groove is not provided below sunshades, rainwater flows directly along the wall surface.

This causes wall dampness over time.
A small drip groove itself can significantly reduce leakage.

Lift Pit Waterproofing (For Villas/Apartments)

Lift pits are underground structures and highly vulnerable to groundwater seepage.

Waterproof admixtures should be added during the concrete pouring stage itself.